Key Features:

2,048Wh LiFePO4 battery capacity - enough to power fridges, laptops, routers, lighting and more
2,400W continuous AC output with 4,000W peak power across 4 AC outlets
SurgePad™ technology supports up to 3,000W for high-wattage appliances
Charges fully in as little as 49 minutes via 2,300W AC input
Solar compatible - up to 800W input via XT60i connector (11–60V)
UPS mode - automatic switchover to battery backup in under 10ms
Expandable capacity - add one battery to reach 4,096Wh or 5,120Wh
2 × USB-C PD 140W ports for fast laptop and device charging
App control via Wi-Fi and Bluetooth - monitor usage, set charge limits, configure Time-of-Use
LFP battery rated for 4,000+ charge cycles - built for long-term, everyday use
5-year warranty

Portable Power Station for Home Backup, Off-Grid & Camping | Anker SOLIX C2000 Gen 2

The Anker SOLIX C2000 Gen 2 is a high-capacity portable power station designed for people who need dependable power across a range of situations - at home, on a worksite, in a campervan, or at a remote location. With 2,048Wh of storage and 2,400W of continuous AC output, it can run everyday appliances and sensitive electronics simultaneously without compromise.

Power Output

Four AC outlets (230V EU Schuko) deliver up to 2,400W continuously, with a 4,000W peak for short bursts. SurgePad™ technology extends this to 3,000W for heat-generating appliances such as kettles, heaters, and hair dryers - devices that typically trip lower-rated power stations. For device charging, two USB-C PD ports deliver up to 140W each, alongside a 15W USB-C port, a 12W USB-A port, and a 12V/10A car outlet.

Charging Speed & Solar Input

Via AC wall charging, the C2000 Gen 2 accepts up to 2,300W, bringing the unit from empty to full in approximately 49 minutes - fast by any measure for a 2,048Wh station. For off-grid use, it accepts solar input up to 800W via the XT60i connector (11–60V). When both AC and solar are connected simultaneously, solar power takes priority and AC supplies the balance — making the most of available renewable energy without requiring manual switching.

UPS Home Backup

The C2000 Gen 2 can be used as an Uninterruptible Power Supply (UPS) for connected devices. In the event of a mains power outage, it switches automatically to battery power in under 10 milliseconds - fast enough that routers, computers, and other sensitive equipment continue running without interruption or restart.

Expandable Capacity

The base unit provides 2,048Wh, which is sufficient for most short-term backup or off-grid needs. For extended use, one additional expansion battery can be connected - the BP2000 brings total capacity to 4,096Wh, and the BP3000 brings it to 5,120Wh. This makes the C2000 Gen 2 a scalable solution that can grow with your power requirements over time.

Battery Technology & Longevity

The C2000 Gen 2 uses LiFePO4 (LFP) battery chemistry, which offers a significantly longer cycle life than standard lithium-ion alternatives. It is rated for 4,000+ charge cycles to 80% capacity - the equivalent of over a decade of regular daily use. LFP chemistry also operates more safely at higher temperatures and degrades more gradually than other battery types.

App Control

The Anker app connects via Wi-Fi or Bluetooth and provides real-time monitoring of charge status, power consumption, and connected devices. From the app, users can set upper and lower charge limits to protect long-term battery health, configure Time-of-Use (TOU) scheduling to charge during lower-rate electricity periods, and manage paired expansion batteries.

Practical Design

At 18.9kg and 459 × 250 × 257mm, the C2000 Gen 2 is compact enough to be moved between locations - garage to kitchen, home to van - without specialist lifting equipment. It is designed to sit on a flat surface or be stored in a cupboard or utility area without taking up excessive space.

Specifications

Specification	Detail
Model Number	A17832A1
Battery Type	LiFePO4 (LFP)
Capacity	2,048Wh
Cycle Life	4,000+ cycles to 80%
AC Output	4 × 230V Schuko - 2,400W continuous / 4,000W peak
SurgePad™	3,000W
USB-C Output	2 × 140W PD + 1 × 15W
USB-A Output	1 × 12W
DC Output	1 × 12V/10A
AC Charging Input	Up to 2,300W (~49 min full charge)
Solar Input	XT60i - 11–60V, max 800W
UPS Switchover	Under 10ms
Connectivity	Wi-Fi + Bluetooth
Weight	18.9kg
Dimensions	459 × 250 × 257mm
Warranty	5 Years